disculpas por las macs que pudiera haber en el log

por otro lado

si he intentado acceder por http://192.168.100.1:1337 y nada, yo creo que eso del puerto 1337 es solo para el sigma-x2 porque al hacer un inetShow muestra esto y ese puerto no esta en escucha



CM> inetShow


Instance: BcmApplication (0x80746bd0)

Active Internet connections (including servers)
PCB Proto Recv-Q Send-Q Local Address Foreign Address (state)
-------- ----- ------ ------ ------------------ ------------------ -------
807695d4 TCP 0 279 192.168.100.1.23 192.168.100.11.427 ESTABLISHED
80769550 TCP 0 0 192.168.100.1.80 0.0.0.0.0 LISTEN
80768e9c TCP 0 0 192.168.100.1.23 0.0.0.0.0 LISTEN
807696dc UDP 0 0 192.168.100.1.161 0.0.0.0.0
80769448 UDP 0 0 10.195.147.111.161 0.0.0.0.0
80769658 UDP 0 0 10.195.147.111.318 0.0.0.0.0
80769340 UDP 0 0 127.0.0.1.5501 0.0.0.0.0

a lo que me refería con extraño es si es normal que al terminar la configuración pare el servicio de DHCP

(que conste que me he asegurado de que no haya macs en este trozo del log)

mot_scanList: Writing to Flash!
0x0000447a ['CmDocsisCtlThread' id=0x807c0a80] BcmDocsisCmHalIf::ConfigOperation
al: (DOCSIS CableModem HalIf) Running IGMP in DOCSIS 1.0 mode!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Stopping DHCP server...
Leaving standby mode!
Stopping DHCP server...
0x000044fc ['IGMP Thread' id=0x807ba580] BcmIgmpThread::Starting Igmp Thread...:
(IGMP Thread)
Not logging event ID 2223898626, control for level 7 is 0.
SB5100 CM Event Log sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 2223898625, control for level 7 is 0.
Not logging event ID 2223898628, control for level 7 is 0.
NonVolDeviceDriver::NonVolDriverWrite: WARNING - Dynamic NonVol is 'full' - no
more free segments; need to erase and start over!
NonVolDeviceDriver::NonVolDriverWrite: WARNING - Erasing flash region; a power
failure here will cause settings to be lost!
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
CM>