Foros ZackYFileS - Ver Mensaje Individual - LT6½ OE1.6 for DM8000HD PVR released (LT revision 3430)

[B][SIZE="4"]LT6½ OE1.6 for DM8000HD PVR released (LT revision 3430) - aka LT Six and a half![/SIZE][/B]

REQUIEM FOR…a Dream!!!

Lately things became very hard for most of us in the LT Team regarding personal issues that prevent us from focusing to our main purpose regarding the SAT scene, which is out beloved LT image. We have done too much progress regarding the changes, and the transition from LT5th Campaign to the LT6th Sense was almost flawless. New updates were going public with the use of the Service Packs and bugs that were not revealed during the beta testing era, where eliminated after all. However and apart from our problems, each and every one of us is trying to do its best to keep this "idea" alive and make the Sat community and especially our supporters as happy as possible.
This was supposed to be LT7 but the thing called real life struck us hard, very hard... We then did the best of the situation and here is LT6½ image. It is a LT6 but updated with latest Enigma2 and OE 1.6. LT7 is postponed for the near future till our beloved head graphics designer Nemesis is back. LT7 will have the same structure as LT6½ but with the addition of a new/enhanced skin. Till then…sit back and enjoy our beloved image…

MAJOR CHANGES
Openembedded
OE 1.6

Drivers:
DM8000HD PVR, DM800HD,DM500HD 20100623
DM7025 20100804

Secondstage:
DM8000HD PVR, DM800HD, DM7025 #76
DM500HD #79

Enigma2:
20100930 Experimental

LT revision:
3430

Note 1!
If you have the device connected during boot then it will be mounted by /etc/fstab and in such case mountpoints below will be used. This is for your harddisc and if you choose to use LT Link Manager or LT EPG Cachelink Manager with CF or USB Stick.

Hotplug, devices you insert when Enigma2 is running, is handled by autofs and all thoose devices are mounted at /autofs and use the devicename from /dev like /autofs/sda1

DM8000HD PVR
/dev/hdda1 /media/hdd auto defaults 0 0
/dev/card_sd1 /media/sd auto defaults 0 0
/dev/card_cf1 /media/cf auto defaults 0 0
/dev/card_sm1 /media/sm auto defaults 0 0
/dev/card_ms1 /media/ms auto defaults 0 0
/dev/usb_lower1 /media/usb auto defaults 0 0
/dev/usb_upper1 /media/usb1 auto defaults 0 0
/dev/usb_front1 /media/usb2 auto defaults 0 0
/dev/usb_internal1 /media/usb3 auto defaults 0 0

DM800HD
/dev/hdda1 /media/hdd auto defaults 0 0
/dev/usb_lower1 /media/usb auto defaults 0 0
/dev/usb_upper1 /media/usb1 auto defaults 0 0

DM500HD
/dev/hdda1 /media/hdd auto defaults 0 0
/dev/usb_internal1 /media/usb auto defaults 0 0
/dev/usb_external1 /media/usb1 auto defaults 0 0

DM7025 (do not use USB on dm7025)
/dev/sda1 /media/hdd auto defaults 0 0
/dev/sdc1 /media/cf auto defaults 0 0

If you rebuild your dm500hd to activate USB we recommend that you add some kind of over-current protection since otherwise you can destroy your box!

LT Team takes no responsibility for your box if you modify it and be aware that your Warranty will be void.

Note 2!
Since this is image is based on LT7's code the LT Link Manager controlfile is not lt6links.cfg anymore it is now lt7links.cfg

Note 3!
DM7025 image is experimental and might not work yet. No further support for this image will be given.

A big special thanx to all the Beta testers involved! Those are the "behind-the-scene" heroes trying to make us all better: t40t40, Leatherface, Jimdefruit, zumzum, acid-burn, dream_dxb, emitec, psykix, Vlad, Zenox, Zeranovsky, ~Ryu~, AVR-rulez, hassogava, s_a and all the others that i might forget...

Best regards
/LT-Team®

[URL="http://www.lt-forums.org/LT/images/LT.Sixth.and.a.half-dm8000.nfi http://www.lt-forums.org/LT/images/LT.Sixth.and.a.half-dm800.nfi http://www.lt-forums.org/LT/images/LT.Sixth.and.a.half-dm500hd.nfi http://www.lt-forums.org/LT/images/LT.Sixth.and.a.half-dm7025.nfi"][B]Links[/B][/URL]