eske como este hilo es tan largo me lo he leido pero a veces ya me pierdo y andaba buscando lo que decian de las ruedas y no hay manera xD a ver si alguien mas lo confirma :P


a aki esta:

A friend of mine allowed me, to open his brand new Navibot to see changements between my old "first Generation" SR8855.

Following points i observed:

-New thinner flexible cable for the motors (completely white)
-The two interference suppression components on the pcb are now mounted. (by my old the two component places empty)
-The camera has a new optic
-The wheels are harder as the old one.
-The cable to the sensors at the backside are stronger
-The bur (Drive noise) are dramatically decreased !
-The navibot can change his speed in finer steps
-The connection two the chargestation is now with lower speed, but with more precision.
-the speed from the two front edge brushes is now lower as the old brushes. (Perhaps better for kicking dust balls...).
-The cleaning noise is reduced too.
-the edge mode is enhanced, the bot drives smoother along the wall. (Looks like room