Echa un vistazo al TXT que le acompaña. Esto pone:

[QUOTE]
############################################################################################################

Use good quality FLASH disk with best read/write performace to avoid damage STB, formatted at FAT32 file system and totally erased device. Copy the ".abs" file on to the root (/).

IMPORTANT: Disconnect STB from INTERNET and SAT signal during upgrade.

TIKS is already ENABLED by default, so if you are comming from a OFFICIAL SW but you have problems with it press MENU --> CONFIGURATION --> INFORMATION --> and press "7777" to enable the hidden menu. TIKS has to be ENABLED only. You have to configure your network by WIFI dongle or Ethernet cable, (if USB WIFI dongle is connected but not in use because you want to use Ethernet cable you have to DISABLE WIFI it first).

UPGRADE PROCESS:

1.- Extract ".abs" file into root folder (/) using a Flash disk device.
2.- Insert USB disk on "USB" port slot.
3.- Go to TOOLS option inside menu, then select UPGRADE BY USB option. Select USB drive.
4.- Select "FW" update file (*.abs), press RED button (upgrade), and select "Full Upgrade". Wait until SW will be upgraded!!!
5.- Wait until RS8100HD reboots, dont touch any remote commander key.
[/QUOTE]