X atila_1974

Mira lo que le puso Gryeti, que es un monstruo, defeo, jejeje, a este compañero que se había equivocado al cargar uno BootLoader erroneo, ya se que tu caso no es el mismo, pero es para que compruebes si efectivamente, no hay actividad alguna en el puerto com.

Esto que sigue se hace con el HiperTerminal de windows.

@limoncello:

Well my friend, You have a wrong BootLoader for your STB model, but It is corrupted ?

For testing this before to try another more intrusive method you try to launch your Windows Hyperterminal program and configure it with these parameters:

Direct to COM1 or to the port with the serial cable attached.

-1152000 Baud.
-Data bits: 8 bits
-Parity: None
-Stop bits: 1
-Flow Control: None

Now Power-on your Box from the rear switch and see if the log on the screen is the same or near to this one:


==============================================
Version 2.1.2
Date May 15 2003, Time 16:38:18
NO MICOM : 1/2M !
==============================================

NO_ACKNOWLEDGE with PC.
Jump : 0x7feffffe


STAVMEM_Init()=OK
STAVMEM_CreatePartition()=OK
STEVT_Init()=OK
STPWM_Init()=OK
STCLKRV_Init(CLKRV0)=OK
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
STCLKRV_Open(CLKRV0)=OK
STAUD_Init(AUD0)=Ok
STDENC_Init(DENC0, InvOut 0)=OK
STVTG_Init(VTG0)=Ok
STVID_Init(VID0)=driver changed at 3 April 2003=Ok
OSD_Initialize(OK)

¿Te sale algo, o no detecta nada?

__________________