Cita:
Iniciado por malibuq
saludo this is my 1st Post aqui ^^
i regnorized that the New DB1 with CustomID - 01006 Chip has an other Remote Predata !!
MX04 <-> DB1 Imperial
DB 1 - > 1A00010400000000FF800000
MX04 - > 1A00010400000000BF800000
and one more Problem is
the new DB1 Software with the CustomID - 01006 Chip dont receives any Signal - only "No Signal" is on the TV Screen @ every Channel !!
so i am Happy i have Supported one more Fix for this great Tool !!
Edit :
so i have a little bit more Information about the differences between the Smart MX04 and the new DB1 Tuner , 2 Pins are changed .
Pin9 is now Pin8 & Pin8 is Pin9
i hope this Helps anymore , maybee it`s possible to Change the Wires with a Software Mod .
bye MaLiBuQ
|
Hi,
MaLiBuQ
Lo primero, bienvenido al foro xD
Gracias por la "Predata" para los mandos de los "
Imperial DB1", porque no me había dado cuenta que fueran diferentes, al igual que los M50, y no dudes que lo incluiré en mi próxima Beta del programa, al igual que los "[B]ID-Fixes[/B]" xD
Según deduzco de tu post, aparte del mando, el "[B]Tuner[/B]" tampoco os funciona con los firms de los Smart, porque vuestro Tuner tiene dos Pins invertidos respecto a los Smart y clones.
Y leyendo en vuestro foro, el problema es que existen dos modelos del "Imperial DB1" con diferente tuner, y que efectivamente tienen el "[B]GPIO-12[/B]" y "[B]GPIO-13[/B]" intercambiados entre si, pero realmente no es mucho problema, ya que con un simple Fix para el "[B]I2C del Tuner[/B]" en el firm se soluciona, y que yo en principio no le di mucha importancia y no los incluí al programa porque el tuner de nuestros SL65-B1 no utiliza ese puerto, pero te los pongo aquí:
[CODE][B]- I2C TUNER FIXES -[/B]
------------------------------------------------
000000000C0000000D00000000000000001200B805000000[B] -> SMART / EDISON / HIVISION / AMSTRAD / S300-CI[/B]
000000000D0000000C00000000000000001200B805000000[B] -> IMPERIAL-DB1[/B]
00000000000000000000000000000000001200B805000000[B] -> COMAG / SL35C-29C / MORGAN[/B]
000000000E0000000F00000000000000001200B805000000[B] -> TRUMAN / METRONIC[/B]
00000000070000000A00000000000000001200B805000000[B] -> SL65-SPI-29C[/B]
00000000200000001F00000000000000001200B805000000[B] -> SL45-HDMI-29C[/B]
000000002A0000002B00000000000000001200B805000000[B] -> TRUMAN-29C / SUNNY-29C / MAX-29C[/B]
------------------------------------------------[/CODE]
No los he probado, pero simplemente bastaría con coger la cadena de bytes de los Smart y sustituirla por la del DB1 y listo xD
aquí te lo pongo mas detallado:
[CODE]
[B]DigitalBox-Imperial-DB1 "OLD"[/B] (Tuner: Sharp S7HZ302A)
------------------------------
[B]0C[/B]000000 -> 0x0C ; GPIO 12, SDA - Ali pin 183 (GPIO 12) -> Tuner pin 8
[B]0D[/B]000000 -> 0x0D ; GPIO 13, SCK - Ali pin 184 (GPIO 13) -> Tuner pin 9
[B]SMART / EDISON / HIVISION / AMSTRAD / S300-CI[/B] (Tuner: Sharp S7VZ0502)
------------------------------
[B]0D[/B]000000 -> 0x0D ; GPIO 13, SDA - Ali pin 184 (GPIO 13) -> Tuner pin 8
[B]0C[/B]000000 -> 0x0C ; GPIO 12, SCK - Ali pin 183 (GPIO 12) -> Tuner pin 9[/CODE]
[B]PD:[/B] Para el resto, en principio estos "[B]I2C-Fixes[/B]" no los necesita los Comag ya que como he dicho antes, no tienen conectado el I2C del tuner a la CPU, pero seguramente aplicándolo al firm que nos interese a lo mejor soluciona lo del conflicto con el diodo DP5 y el tuner, cuando saque tiempo de los incluiré en otra futura Beta xD