Pero el soft para cargar es para DOS..., que cosa mas rara...

Pongo el doc que acompaña al [B][I]ALi flash writer, version 1.0.1
[/I][/B]

[QUOTE]ALI JTAG USER’S GUIDE

1, install USB driver
a, release the compressed file “ALIUSB29.rar” to your computer, here we suppose release it to driver D:
b, plug the JTAG tool into your computer USB jack and install the USB driver, the driver(BulkUsb.Inf) file is under the directory “D:\ALIUSB29\DRIVER\”.
2, how to burn a binary file into a STB
a, cut off the STB power supply.
b, connect the STB and computer with JTAG tool,
c, turn the STB to DEBUG mode.
d, put your binary file(suppose the file name is AV.abs) to be burn into the STB under the directory “D:\ALIUSB29\”
e, turn on the STB.
f, run MS-DOS, and enter the directory “D:\ALIUSB29\”
g, enter the burn command “flashwr.bat AV.abs”
D: \ALIUSB29> flashwr.bat AV.abs
Then you can see the information below:

ALi flash writer, version 1.0.1
Get target setting from "sdram_config.txt"...
Reset EJTAG...OK
USB ICE Card Firmware version is 1.0.0
USB ICE Card Driver version is 1.0.0
Please reset the RISC...OK
Init SDRAM with default flow!
Clear both I/D caches

Download tool file "flashwr.abs" to ram...Download success!
Download binary file "AV.abs" to ram...Download success!
Excecute tool to write flash, length 524288 (0x80000)...

Binary Length: 0x200000 CRC: FC58DCAB
00000000 OK
00004000 OK
00006000 OK
00008000 OK
00010000 OK
00020000 OK
00030000 OK
00040000 OK
00050000 OK
00060000 OK
00070000 OK
00080000 OK
00090000 OK
000A0000 OK
000B0000 OK
000C0000 OK
000D0000 OK
000E0000 OK
000F0000 OK
00100000 OK
00110000 OK
00120000 OK
00130000 OK
00140000 OK
00150000 OK
00160000 OK
00170000 OK
00180000 OK
00190000 OK
001A0000 OK
001B0000 OK
001C0000 OK
001D0000 OK
001E0000 OK
001F0000 OK
Burn 00200000 OK
ICE closed!

Binary file burn complete, turn the STB to normal mode and reboot it.

Tips:
If there is any bug during the burning process, try to remove the JTAG tool from your computer then plug it in, and, turn on/off the STB, then burn the binary file once again.
[/QUOTE]

sl2