Borro el atmega:


C:\WinAVR\bin>"avrdude" -p m88 -c sp12 -P lpt1 -e

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e930a
avrdude: erasing chip

avrdude: safemode: Fuses OK

avrdude done. Thank you.


Programo la flash:

C:\WinAVR\bin>"avrdude" -p m88 -c sp12 -P lpt1 -U flash:w:"C:\at88loader.BIN":a -F

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e930a
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "C:\at88loader.BIN"
avrdude: input file C:\at88loader.BIN auto detected as raw binary
avrdude: writing flash (8192 bytes):

Writing | ################################################## | 100% 3.58s

avrdude: 8192 bytes of flash written
avrdude: verifying flash memory against C:\at88loader.BIN:
avrdude: load data flash data from input file C:\at88loader.BIN:
avrdude: input file C:\at88loader.BIN auto detected as raw binary
avrdude: input file C:\at88loader.BIN contains 8192 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 2.95s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
0xff != 0x00
avrdude: verification error; content mismatch

avrdude: safemode: lfuse changed! Was e0, and is now ff
Would you like this fuse to be changed back? [y/n] n
avrdude: safemode: hfuse changed! Was df, and is now ff
Would you like this fuse to be changed back? [y/n] n
avrdude: safemode: efuse changed! Was 0, and is now 7
Would you like this fuse to be changed back? [y/n] n
avrdude: safemode: Fuses OK

avrdude done. Thank you.


Programo Efuses:

C:\WinAVR\bin>"avrdude" -p m88 -c sp12 -P lpt1 -U efuse:w:0x00:m -F

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e930a
avrdude: reading input file "0x00"
avrdude: writing efuse (1 bytes):

Writing | ################################################## | 100% 0.00s

avrdude: 1 bytes of efuse written
avrdude: verifying efuse memory against 0x00:
avrdude: load data efuse data from input file 0x00:
avrdude: input file 0x00 contains 1 bytes
avrdude: reading on-chip efuse data:

Reading | ################################################## | 100% 0.00s

avrdude: verifying ...
avrdude: 1 bytes of efuse verified

avrdude: safemode: Fuses OK

avrdude done. Thank you.


Programo Hfuses:

C:\WinAVR\bin>"avrdude" -p m88 -c sp12 -P lpt1 -U hfuse:w:0xDF:m -F

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e930a
avrdude: reading input file "0xDF"
avrdude: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.02s

avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0xDF:
avrdude: load data hfuse data from input file 0xDF:
avrdude: input file 0xDF contains 1 bytes
avrdude: reading on-chip hfuse data:

Reading | ################################################## | 100% 0.00s

avrdude: verifying ...
avrdude: 1 bytes of hfuse verified

avrdude: safemode: Fuses OK

avrdude done. Thank you.


Programo Ifuses:

C:\WinAVR\bin>"avrdude" -p m88 -c sp12 -P lpt1 -U lfuse:w:0xE0:m -F

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e930a
avrdude: reading input file "0xE0"
avrdude: writing lfuse (1 bytes):

Writing | ################################################## | 100% 0.00s

avrdude: 1 bytes of lfuse written
avrdude: verifying lfuse memory against 0xE0:
avrdude: load data lfuse data from input file 0xE0:
avrdude: input file 0xE0 contains 1 bytes
avrdude: reading on-chip lfuse data:

Reading | ################################################## | 100% 0.00s

avrdude: verifying ...
avrdude: 1 bytes of lfuse verified

avrdude: safemode: Fuses OK

avrdude done. Thank you.

[B]Ahora parece que bien ¿no?
De todas formas, hasta que no me comentes, no desmonto el "tinglao".[/B]