X atila_1974

Bueno pues te pongo yo en resumidas cuentas lo que Gryeti le decía ha este colega:

@limoncello:

Well my friend, This is stranger ! I see that there is still the incorrect (wrong) BootLoader version 2.1.2 in your box after repair in the shop.

For your convenience, search and locate the BootLoaders versions 2.1.8 and 1.1.2

Make the following things exactly:

1º Power-off your Box.
2º Open the cover of your Box and unplug the 11 pins connector from the front panel.
3º With the front panel disconnected try to download the BootLoader 2.1.8 that I indicated in my previous post.
4º Once you have the Boot 2.1.8 in your box repeat the steps to load the correct version 1.1.2
3º Power-off you Box and plug the 11 pins connector and close it.

If all is OK now you have the correct BootLoader in your STB for all firmware exchange without problems.

You can try after to download the KSC-511H firmware with all options.

Greetings and good luck.

_______________


En resumidas cuentas:

1º Apaga el deco
2º Abre la tapa del deco y desenchufa un conector que tiene 11 pines del panel frontal.
3º Con el panel frontal desconectado intenta cargar el Bootloader que correspone a tu deco, para eso mira la flash que tienes en la placa y en el manual de Gryeti veras la que le corresponde.
4º Apaga el deco, ponle de nuevo el enchufe de 11 pines y lo vuelves a cerra.

Haber si lla damos con la tecla.

__________________