error en pen drives
 

hola amigos, tengo una placa gigabite ga-a75m-s2v con 4 higas de ram, 2 hdd uno de arranca con una ssd y el otro de almacen con 2 t.

la cuestion es que desde hace unos dias no me deja escribir en los pendrives, me dice que error de escritura, me voy al ordenador de mi hijo y si que me deja leer y escribir, menos en uno que ya esta en la basura.

la cuestion es que le he puesto sistema al disco que utilzo de almacen y funcionan perfectamente en cambio con la ssd no hay forma, le borro en el panel de control todos los controladores y supongo que me volverá a pillar los mismos.

alguna solucion antes de formatear ? (no hay copia de seguridad).

saludos

contestacion de gigabyte: tam`poco funciona.

Thank you for emailing GIGABYTE.
We are delighted with your interest in our products.

Is there any changes in your system before it happens? Which pen driver have this problem? Is that possible test other pen driver?

On which PC this pen driver without problem.

You can try make a full reset about your system like below and see if there is still problem:

1) Turn off power.
2) Remove the power cord from the PSU and wait 30s.
3) Take out the battery gently and put it aside for about 5 minutes or longer. (Or you can use a metal object to connect the two pins in the battery holder to make them short-circuited.)
4) Re-insert the battery to the battery holder.
5) Now shortcircuit Clear CMOS jumper for 10 s.
6) Remove shortcircuit.
7) Connect power cord to PSU again and turn on power.
8) Power on your system.
9) If BIOS can POST, please enter the BIOS and load the optimal defaults setting.
10) Save changes and reboot the system.

Load Optimized Defaults. Check Time and date. Check SATA Mode setting. If you did set SATA Mode to RAID Mode before you did Clear CMOS, please set SATA Mode back to RAID. Finish bios setup with Save & Exit.

Regards

GIGABYTE Team

If you are satisfied with our service, please rate us.
If not, we would be pleased to receive constructive criticism in this way.

bueno, se ve que se ha hbia corrompido el S.O. y he aprovechado para cambiar la ssd por una de mas tamaño. y a funcionar todo otra vez.

saludos