x bubela
estas muy verde ve leyendo posts, sobre el season2 sé que abria algo aqui tienes un hilo que habla de el:
me he dado una vuelta por ti, este es el wincardemu.ini de la joker con el season2:
Posted: Mon Aug 15th, 2005 04:10 pm Quote Reply
As requested elsewhere, here is the working wincardemu.ini for the Joker cam.
This has com1, change if you use another com port. In the pc, set com port settings to 4800, 8, none, 1, xon/xoff. Also 'Advanced' settings to lowest top and next lowest bottom line.
The cam communicates in the CA setting I-B generally.
Regards, pcd.
Attachment: wce.ini.Joker.zip (Downloaded 105 times)
Last edited on Mon Aug 15th, 2005 04:23 pm by pcd1
AQUI DICE QUE LO TIENES QUE CONECTAR AL PC EN EL COM1 O SINO CAMBIARLO EN EL ARCHIVO, LAS CARACTERISTICAS DEL PUERTO SON 4800, 8 , NINGUNO, 1, XON/XOFF Y EN ADVANCED SETTINGS BAJAR LOS DOS.
como esta en el archivo de fielescenter del anterior post de este hilo me parece.
A PARTIR DE AQUI HASTA LAS LINEAS ------>>> -------------------------------------
# Sample Configuration file
# the characters "#" or ";" starts a comment
# If file name contains spaces use "...."
#
## Sets the console window size
screenrows = 65
screencols = 100
scrollback = 500
# WCE is two emu's in one package
# in conax and irdeto cams, it handles multiple systems (for conax cam defaultconaxmode sets what system)
# else it's a 1-in-one EMU, Viaccess in a Viaccess cam and so on..
# defaultmode: 0=Eurocrypt, 1=Viaccess, 2=Conax, 3=Seca, 4=Irdeto, 5=Videoguard
defaultmode=4
# defaultconaxmode: 0=beta 1702, 2=beta 1722, 6=beta 1762, n=nagra, c=conax, v=viaccess, i=irdeto, s=seca
defaultconaxmode=i
ShowExtraEcmDetails=on
# if set to 'on', send all response data at once (faster, shorter delay),
# else send byte-at-a-time (slower but more compatible)
# Default is off (a Force don't like it being on)
#CamHighSpeedMode=on
# 30W mecm debug..
# default on = PC will beep (about 5 seconds in advance) when an error in mecm data is detected
# so you can watch out for it's result
#BeepOnNagraMecmErrors=off
# default debug modes (hex)
# initial value on start, and up to 4 values that can be toggled
# debug = initial deb1 deb2 deb3 deb4
debug = ff 01 03 07 ff
# default serial port debug modes
# syntax as for debug
#serdebug = 03 01 03 07 ff
#
# Directories for data files [datadir] and log files [logdir] :
# Use "" for current working directory
#datadir = ""
#logdir = ""
# automatic checking for add_*.dat:
# N: =0 never, >0 check for add_*.dat files each N seconds
#autocheck = 120 ; each two minutes
autocheck = 0
# automatic saving og key files *.dat :
# N: =0 never, >0 save key files each N seconds
#autosave= 14400 ; once every 4 hours
autosave=0
# SA hunt settings:
#sahuntinc = 0x100
#sahunttimer=180
# For the system sections [xxxx] :
# port=N
# for port= 1 => COM1 2 => COM2 etc.
#
# baud = NNNNN
# direct or inverse : use direct og inverse byte convention
# parity = mark/space/even/odd/none : usually "direct=>even" and "inverse=>odd"
#
# Often used values for baud are 8860, 9600 and 10472
#
#
# optional user defined ATR :
# atr = N1 N2 N3 N4 N5 N6 .....
#
# Log file names for log file and key updates:
# mainlog= "my.log"
# updlog = "my_update.log"
#
[Conax]
port=1
#baud=8861
baud=9600
parity=even
direct
#This ATR should do fine on all receivers, MHW or not
atr = 3b 24 00 30 42 30 30
#atr=3b 24 00 80 72 a4 45
mainlog = "conax.log"
updatelog = "conax_update.log"
logmask = 4 dd260000** System request
logmask = 4 ddb2****** OSD Request
logmask = 4 dda2****** ECM - Control Words
logmask = 4 dda4****** DD A4
logmask = 4 ddca****07 CA INS A2 - Select system
logmask = 4 ddca****0f CA INS A2 reply (ECM)
logmask = 4 ddca****1e CA INS A2 reply (ECM)
logmask = 4 ddca****** CA command answer
logmask = 2 dd820***** DD 82 0x Emm-Sys, Emm-PID
logmask = 2 dd840000** EMM update
[Eurocrypt-S]
port=2
baud = 9600
mainlog = "ecs.log"
[Eurocrypt]
port=2
baud = 9600
mainlog = "ec.log"
updatelog = "ec_update.log"
#
# logmask [=] debugvalue MASK text
#
# the debugvalue is masked (AND) with current debug level
# typical values : 0 (never), 1 (lowest), 2, 4, 8 (all)
#
logmask = 2 ac00****** SA-hunt increment current SA
logmask = 2 ac01****** SA-hunt reset timer
logmask = 2 ac10****** Show on stdout current channel ID & key
logmask = 2 acff****** EuroCrypt initialization
# Eurocrypt Log Messages
logmask = 4 8702****** Select facility data (FAC)
logmask = 4 8704****** Result - facility data (FAC)
logmask = 4 8706****** Data - facility data (FAC)
logmask = 4 ca88****** Encrypted data package
logmask = 4 cac0****** Decrypted data package
logmask = 4 caf0****** Preparing adresses for service
logmask = 2 ca1800**** Card update for entire audience
logmask = 2 ca180101** Card update for group of cards
logmask = 2 ca1801**** Card update for group of cards
logmask = 2 ca1802**** Card update for single card
logmask = 4 ca2400**** Modify lock/unlock indicators
logmask = 4 ca2401**** Modify PIN code
logmask = 4 ca2402**** Modify maturity rating
logmask = 4 ca2403**** Modify purchase ceiling
logmask = 4 ca26****** Instruction unknown to card
logmask = 4 cab8****** B8-response to caac... instruction:
logmask = 4 caa400**** Select channel
logmask = 4 caa402**** Select next channel
logmask = 4 caa404**** Set channel ID
logmask = 4 caa4****** Unknown CA A4 xx
logmask = 4 caac06**** Select Maturity Rating
logmask = 4 caac08**** Select Lock/Unlock Indicators
logmask = 4 caaca4**** Select Unique Address
logmask = 4 caaca5**** Select Shared Address
logmask = 4 caaca6**** Select Group Address
logmask = 4 caaca7**** Select label name
logmask = 4 caaca8**** Select subscription date/theme/level
logmask = 4 caaca9**** Select subscription link
logmask = 4 caacaa**** Select pre-book PPV
logmask = 4 caacac**** Select total credits
logmask = 4 caacad**** Select overdraft
logmask = 4 caacb1**** Select used credits (1)
logmask = 4 caacb2**** Select used credits (2)
logmask = 4 caacb4**** Select impulse PPV (B4)
logmask = 4 caace4**** Select impulse PPV (E4)
logmask = 4 cac0****12 Send plainwords
logmask = 4 cac0****06 Send channel ID (entity)
logmask = 4 cac0****04 Send PPV information
[Viaccess]
port=2
baud=10472
#baud=9600
parity= odd
inverse
mainlog = "via.log"
updatelog = "via_update.log"
# Viaccess Log Messages (from eurocrypt)
logmask = 4 8702****** Select facility data (FAC)
logmask = 4 8704****** Result - facility data (FAC)
logmask = 4 8706****** Data - facility data (FAC)
logmask = 1 bc******** Data - facility data (FAC)
logmask = 8 ca88****** Encrypted data package
logmask = 4 caf0****** Preparing adresses for service
logmask = 8 caf8000b12 Preparing special service + hash countrycodes
logmask = 8 caf8****06 Preparing special service + hash
logmask = 4 caf8****** Preparing special service + hash
logmask = 2 ca1800**** Card update for entire audience
logmask = 2 ca180101** Card update for group of cards
logmask = 2 ca1801**** Card update for group of cards
logmask = 2 ca1802**** Card update for single card
logmask = 2 ca2400**** Modify lock/unlock indicators
logmask = 2 ca2401**** Modify PIN code
logmask = 2 ca2402**** Modify maturity rating
logmask = 2 ca2403**** Modify purchase ceiling
logmask = 4 ca26****** Instruction unknown to card
logmask = 4 cab8****** B8-response to caac... instruction:
logmask = 2 caa400**** Select channel
logmask = 2 caa402**** Select next channel
logmask = 4 caa404**** Set channel ID
logmask = 4 caa4****** Unknown CA A4 xx
logmask = 4 caac06**** Select Maturity Rating
logmask = 4 caac08**** Select Lock/Unlock Indicators
logmask = 4 caaca4**** Select Unique Address
logmask = 4 caaca5**** Select Shared Address
logmask = 4 caaca6**** Select Group Address ??
logmask = 4 caaca7**** Select label name
logmask = 4 caaca8**** Select subscription date/theme/level
logmask = 4 caaca9**** Select subscription link
logmask = 4 caacaa**** Select pre-book PPV
logmask = 4 caacac**** Select total credits
logmask = 4 caacad**** Select overdraft
logmask = 4 caacb1**** Select used credits (1)
logmask = 4 caacb2**** Select used credits (2)
logmask = 4 caacb4**** Select impulse PPV (B4)
logmask = 4 caace4**** Select impulse PPV (E4)
logmask = 8 cac0****12 Send plainwords
logmask = 4 cac0****06 Send channel ID (entity)
logmask = 4 cac0****04 Send PPV information
logmask = 4 cac0****1A DATA request
logmask = 4 cac0****03 Channel ID request
logmask = 4 cac0****** Decrypted data package
[Seca]
port=1
baud=9600
atr=3b f7 11 00 01 40 96 54 30 04 0e 6c b6 d6
parity= even
direct
mainlog = "seca.log"
updatelog = "seca_update.log"
logmask = 4 c134000003 Request specific data
logmask = 4 c132****** Read data requested by c134
logmask = 4 c10e****** Identify card, get serial number
logmask = 4 c116****** Read entity bitmap
logmask = 4 c112****** Read provider information, name, ident etc
logmask = 4 c13c****** Encrypted data
logmask = 4 c13a****** Decrypted data
logmask = 4 c130****** PIN control
logmask = 4 c140****** Entitlement management
[Irdeto]
port=1
baud=4800
parity=none
atr=3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 31 2E 32
#atr = 3b 24 00 30 42 30 30
mainlog = "irdeto.log"
updatelog = "irdeto_update.log"
logmask = 4 0102020300 Request Country Code
logmask = 4 0102000300 Request ASCII Serial
logmask = 4 0102010300 Request Hex Serial
logmask = 4 0102030300 Request Provider 00
logmask = 4 0102030301 Request Provider 01
logmask = 4 0102080300 Request Register Dump
logmask = 4 01020E0200 Request Card File 1
logmask = 4 01020E0300 Request Card File 2
logmask = 4 01020903** Incoming Cam Keys
logmask = 4 0101****** Incoming EMM Instruction
logmask = 4 0105****** Incoming ECM Instruction
--------------------------------------------------------------------------------------
http://sataid.com/forum/view_topic.p...16&forum_id=28
http://foros.zackyfiles.com/showthre...ghlight=season
salu2